Preparation Units and Kitchen Work Tables Page 19

Hand Wash Sink - LV-R

Hand Wash Sink stainless steel and knee controlled

Tap Excluded

Dimensions: 30 x 40 x 20cm


Knife Sterilizer - BS-220

Knife Sterilizer makes hygenic all of your knives in industrial kitchens

Dimensions: 51 x 12 x 61cm


Mop Wash Sink - PYE 50

Mop wash sink, two tiers

Dimensions: 50x 70x 90cm


Floor Gully - B3030

Floor Gully siphoned stainless steel, side or bottom drain

Dimensions:

B3030 - D3030 : 30 x 30 cm
B3050 - D3050 : 30 x 50 cm
B3075 - D3075 : 30 x 75 cm
B30100 - D30100 : 30 x 100 cm
B30120 - D30120 : 30 x 120 cm
B30140 - D30140 : 30 x 140 cm
B30185 - D30185 : 30 x 185 cm
B30210 - D30210 : 30 x 210 cm
B30230 - D30230 : 30 x 230 cm


Grease Trap - DSG 16

Grease Trap 23kg capacity

Dimensions: 60 x 44,5 x 41,5cm


Grease Trap - DSG 32

Grease Trap 46kg capacity

Dimensions: 78,8 x 59 x 44,5cm


Electrolux Vegetable Washer - LV200

Tank load 8 -30 Kg - Aisi 304 Stainless Steel - Work area in non-toxic material


Industrial kitchen work table models are divided into two main groups: 60 and 70 series. The feature of this series is the depth of the upper part of the counter. Industrial kitchen work tables with a depth of 60 cm are called the 60 series and 70 cm are called the 70 series. These machines are made of stainless steel and are in 304 AISI quality.
 
As S2000 Kitchen and Refrigeration, we are a manufacturer and we produce the most suitable size for your needs. We are one of the companies that produce the best industrial kitchen worktops with the quality of raw material and the experience we have given for many years.
 
On kitchen work tables, the following features are usually considered. Is there a 4 cm back of the counter or without back? Do you have a shelf? Is there an intermediate shelf? Need a table with a drawer? Do you want an industrial kitchen counter with or without a lid? Do you need a sink bench?
 
Over of the work tables can be changed according to the purpose of use. Polystyrene plate or marble table can be placed on standard stainless steel. Meat cutting operations are done on Polymit table.
 
Wall shelfs and Wall cabinet models can be found in the preparation units and kitchen work tables. Stainless steel cabinet models can be equipped with flush door or sliding cover or an optional intermediate shelf.
 
Stacking racks are mostly used in dry storage and cold rooms. Stackers with wire racks or flat trays are preferred among industrial kitchens storage areas.
 
The S2000 Kitchen uses its own production hoods models in its projects. The hoods produced according to the project are produced as medium type or wall type hoods. Produced with or without filter as required.
 
In this category you can find many auxiliary preparation units such as hand wash sinks, mop wash sinks, floor drains and oil traps.